Hankook and the DTM joined by guests from the Japanese Super GT series for the season finale in Hockenheim

Hankook and the DTM are in Hockenheim this weekend for the final round of the season. With two races remaining, René Rast has already been crowned DTM champion for 2019. The Audi driver wrapped up his second title in arguably the most popular international touring car series at the Nürburgring three weeks ago. Although the title race is no longer open, spectators can still look forward to exciting and spectacular motorsport in Hockenheim. Three cars from the Japanese Super GT series will join the field at the iconic circuit, where they will go head to head with the DTM drivers and their new champion. Among the guest starters will be former Formula 1 world champion Jenson Button, who twice finished runner-up in the Grand Prix in Hockenheim during his time at the pinnacle of motor racing.

Neu-Isenburg/Germany, 1st October 2019 – This weekend’s DTM finale in Hockenheim will be a real challenge for premium tyre maker Hankook. With its ultra-quick corners, a surface that is uneven in places, and huge kerbs, the high-speed circuit near Heidelberg places great demands on the Ventus Race. “After Zandvoort was scrapped for this season, Hockenheim is now by far the most difficult circuit on the DTM calendar for the tyres. To be successful here, the drivers must drive hard from the word go. Plus, they must also take the high kerbs at top speed, which really puts great strain on the construction of the Hankook race tyre,” says Thomas Baltes, the Hankook race engineer responsible for the DTM.

Another stress factor for the Hankook race tyre this season is the new turbo engine, which supplies the race cars with an extra 100 hp of power. Back in May, during the season-opener at the Hockenheimring, the new engine resulted in greater tyre wear than was previously the case with the weaker, naturally-aspirated engine. “The turbo engine has resulted in far greater strain on the rear axle, the result of which is that the wheels spin more often. For this reason, tyre wear at the opening round in Hockenheim was greater than in previous years. However, over the course of the season, the teams have learned a lot about the interplay between the new engine and the Hankook race tyre, and have modified the car set-up accordingly,” explains Baltes.

They must also adapt to the temperature at the Hockenheimring, which could be quite low. The compulsory minimum air pressure and increased camber values should help to get Hankook’s Ventus Race tyre to the optimal temperature range as quickly as possible, even in cooler weather. As well as the weather, another unpredictable factor will be the participation of the three cars from the Japanese Super GT series. At the wheel of one of these cars will be former Formula 1 world champion Jenson Button. The GT500 cars from the Far East will be aligned with the DTM cars using the Balance of Performance (BoP). However, their aerodynamics will also put great strain on the Hankook race tyre.

Thomas Baltes: “The participation of the Japanese cars poses an extra, but very exciting, challenge for Hankook at the end of the season. We will give our guests from the Far East as much support as possible on their appearance in Germany, just as we have done all season for the DTM teams and drivers. We travel to the finale in Hockenheim with both respect and confidence. Hankook and the manufacturers have coped well with the many new challenges they have faced this season.”

Sobre Hankook Tire

Hankook Tire es uno de los principales fabricantes de neumáticos con mayor volumen de producción de todo el mundo de innovadores neumáticos radiales y de altas prestaciones en el segmento Premium para turismos, SUVs, todoterrenos, vehículos comerciales, autocaravanas, camiones, autobuses y vehículos de competición (pruebas en circuitos y carreras callejeras/rallies).

Con el fin de ofrecer a sus clientes la máxima calidad combinada con la excelencia tecnológica, Hankook invierte continuamente en investigación y desarrollo manteniendo sus cinco centros de I+D y ocho grandes fábricas en todo el mundo. La compañía desarrolla y produce soluciones de neumáticos especialmente adaptadas a las exigencias y requerimientos de los mercados regionales.

Además, en el Centro Técnico Europeo de Hankook situado en Hannover (Alemania) se desarrollan neumáticos de Equipo Original de acuerdo con los requerimientos de los fabricantes de vehículos líderes en este continente. La producción para la región europea se desarrolla principalmente en la fábrica ultra moderna de la compañía en Rácalmás (Hungría), inaugurada en 2007 y en proceso de expansión continua.

La Oficina Central Europea del fabricante de neumáticos está situada en Neu-Isenburg, cerca de Frankfurt del Meno en Alemania. El fabricante opera en la mayoría de países europeos y vende sus productos a través de distribuidores regionales en otros mercados locales. La compañía cuenta con 20.000 trabajadores en todo el mundo y sus productos se distribuyen en más de 160 países. La empresa ha sido seleccionada como socio técnico y proveedor exclusivo de neumáticos de la Generación 3 para el Campeonato Mundial de Fórmula E ABB de la FIA, a partir de 2023. Los fabricantes de vehículos líderes confían en los neumáticos de Equipo Original de Hankook. Aproximadamente, el 34 por ciento de las ventas globales de la compañía se generan en Europa y la región CIS.

Para más información visite nuestra página web: www.hankooktire-mediacenter.com o www.hankooktire.com/es

Hankook España S.A | Calle Teide nº 3, 28703 San Sebastián de los Reyes (Madrid) | España

Todas las notas de prensa