Neu-Isenburg, Germany, 8th October 2020 – The first section of the four-kilometre Circuit Zolder is fast and flowing. This is followed in the second section by many changes of direction, tight corners and chicanes. This will place great strain on the brakes of the DTM cars. At the same time, the Hankook race tyre must also provide plenty of traction, in order to allow fast acceleration out of these slower passages. “The asphalt in Zolder is very smooth. To get the Hankook Ventus Race working quickly and get heat into the tyre, the teams should increase the start/finish tyre pressure and the camber values,” explains Thomas Baltes, the Hankook race engineer responsible for the DTM.
The key to success in Zolder is a balanced set-up. When setting up the DTM cars, it is necessary to find a compromise that takes into account both the fast passages and the slow, winding sections. Driving style is still important when it comes to tyre management. Thomas Baltes: “The low grip level of the asphalt in Zolder is a stress factor for the running surface of the Hankook race tyre – albeit a minor one. In contrast, the high kerbs pose a challenge for the construction of the Ventus Race. As such, the drivers should avoid taking the kerbs at speed where possible. On the whole, the racetrack in Belgium represents an average burden for the Hankook race tyre.”
While the DTM enters the final third of its season in Zolder, Barcelona marks the start of the second half of this year’s Formula Renault Eurocup. The young drivers who make up the strong field in this junior Formula series have completed ten of 20 races. The most recent rounds were dominated by the battle between championship leader Victor Martins of France and his closest rival, Brazil’s Caio Collet. The Frenchman has won four of the past six races, with the Brazilian taking victory in the other two races. The two high-flyers, who are separated by just two points, have benefitted from the consistently high performance of Hankook’s Ventus Race, and travel to Barcelona with good prospects of winning again. In third place, within striking distance of the leading pair, is newcomer David Vidales. The Spaniard will be looking to launch a fightback at the 4.655-kilometre circuit in his home country.
This weekend features an absolute highlight on the tour calendar of the 24H Series powered by Hankook – the Coppa Florio 12H Sicily 2020. The Coppa Florio will be held within the endurance series in Sicily for the first time for 39 years. The 24H Series powered by Hankook is thus putting one of the oldest circuit races in the world, which was first held under this name back in 1905, back on the international motorsport stage. The venue is Autodromo Pergusa, which is hosting an international racing event for the first time since 2012. The 4.950-kilometre strip of asphalt winds its way around the Lago di Pergusa, the only natural lake on Sicily.
The Coppa Florio 12H Sicily 2020 is the penultimate round of the 24H Series Europe. Roughly 30 cars, from GT to TCR, are registered in this series. The first part of the 12-hour race will take place on Saturday 10th October, from 11:00 to 17:00. The second half of the race follows on Sunday 11th October, also from 11:00 to 17:00.
